Coralife Pure Flo 2 Replacement Parts Filters - Set Of 4 Parts, original organic cellulose for 4 stage under sink, Coralife Pure Flo 2 Replacement Filters is 100% reduction rate of bacteria, pesticides, herbicides, and heavy metals from tap water, the main stage in this systems is the RO membrane and all of the other replacement filters are serving and providing protection to that membrane, if the pre-filters fail to work due to poor quality, that means your RO membrane will not give you 100% reduction rate. it include 4 filters and a membrane that must be replaced periodically, The different filters represent the different stages that the water goes through while being purified, Generally - Pre-Filters and post-Filters in RO systems can last around 8 To 12 months between changes.
Only the original organic RO membranes can last as long as 5 yearsStage 1-
Sediment filter is the first filter installed in Coralife Pure Flo 2 replacement filters reverse osmosis water filters systeme .
The main function of a sediment filter is to remove large and fine particles from a drinking water, such as sand, dirt, silt, and rust particles. Removal of such particles allows for a better performance of all the following filters, such as carbon block or GAC filters.
- Micron rating: 5 micron.
- Dimensions: ( DXI 8.2 X 1/4 - 7/8") x 2.5"
- Lifetime: please replace every year, depending on the water quality.
This filter is wrapped and sealed and meets NSF Standards and Regulations. Filter will fit any residential reverse osmosis unit that features standard 10” filter housing ( look for compatible systems list )
Stage 2-
Original organic activated carbon GAC filter are well-known for their highly efficient reduction of chlorine taste and odor
Taste and odors of many organic chemicals and volatile organic compounds.
All GAC filters are made with organic high quality coconut shell carbon.
- Micron rating: 5 Micron.
- Dimensions: ( DXI 8.2 X 1/4 - 7/8") x 2.5"
- Lifetime: please replace every year, depending on the water quality.
This filter is wrapped and sealed and meets NSF Standards and Regulations. Filter will fit any residential reverse smosis unit that features standard 10” filter housing ( look for compatible systems list )
stage 3-
Organic original Activated Carbon Block ,Filter are made of fine coconut shell carbon to remove odors and tastes of many organic compounds and chlorine especially.
Because this filters are made of a packed carbon (forming a cylinder block), they offer a much finer filtration of suspended particles and dirt.
- Micron rating: 5 Micron.
- Dimensions: ( DXI 8.2 X 1/4 - 7/8") x 2.5"
- Lifetime: please replace every year, depending on the water quality.
This filter is wrapped and sealed and meets NSF standards and regulations. Filter will fit any residential reverse osmosis unit that features standard 10” filter housing ( look for compatible systems list )
Stage 4-
100% Organic - 50 GPD NSF certified thin film TFC Membrane is the main component of Coralife Pure Flo 2 water systems replacement filters.
- Made with 100% Organic fine thin film flat sheet
- 99% reduction rate of bacteria, pesticides, herbicides, and heavy metals from tap water.
- Only the original organic aquasky rot -4 membrane has The micron rating of a thin film less than 1/10000th of a Micron which is 620,000 times finer than A human hair, 2,500 times smaller than bacteria and 20 Times smaller than any virus.
Product Features:
- 50 Gallons Per Day (15.8 -19.6 Liters per Hour) Capacity
- 99% stabilized salt rejection (minimum rejection 97%)
- NSF/ANSI Standard 58 listed
Operating Conditions :
- Performance specifications based on 500 ppm tap water, 50psi (0.35 MPa) applied pressure, 77°F (25°C) feed water temperature, feed water pH 7-8 and 15% recovery. Element permeate flow may vary ± 15%.
- Maximum operation pressure: 125 psi (0.86 MPa)
- Maximum feed flow rate: 2 gpm
- Maximum operating temperature: 113° F (45° C)
- Maximum feed water turbidity: 1 NTU
- Maximum feed water SDI (15min): 5
- Chlorine tolerance: 0
- Feed water pH range: 2-11
- Minimum brine flow to permeate flow ratio: 4:1
